1. Blundermann

    OP Blundermann GBAtemp Regular Member

    Joined:
    Oct 15, 2013
    Messages:
    173
    Country:
    United States
    Prettier Banners

    [​IMG]

    The Homebrew Launcher's graphics aren't pretty enough for me.
    So I made them prettier.


    [​IMG]

    DOWNLOAD
    Copy contents to /storage_xxx/usr/title/00050000/13374842/
    If on USB, use /storage_usb. If on system memory, use /storage_mlc.


    [​IMG]


    The same goes for the System Config Tool.
    That bright red background hurts my eyes.


    [​IMG]

    DOWNLOAD
    Copy contents to /storage_xxx/usr/title/00050000/1f700f61/

    If on USB, use /storage_usb. If on system memory, use /storage_mlc.

    [​IMG]

    How to install


    NOTE: Do this in RedNAND.
    1. Download ftpiiu everywhere and place the .elf into the /wiiu/apps/ftpiiu_everywhere/ folder on your Wii U's SD. This folder will most likely not exist; create it.
    2. Download the Prettier Banner pack that you want to install. Extract it to a folder.
    3. (Optional) To ensure that the banner and icons are safe to use on your Wii U, use TgaVerify. I can confirm that they work perfectly on a USA Wii U, but this is more to check for possible corruptions during the downloading or extracting process.
    4. Install an FTP client if you don't have one already. I recommend using FileZilla or WinSCP.
    5. Verify that your Wii U and PC are on the same Wi-Fi. Launch ftpiiu everywhere using the Homebrew Launcher on the Wii U. ftpiiu will display an IP on screen. Connect to it using your PC's FTP client.
    6. Copy the contents of the Prettier Banners download to their respective directories shown underneath the download link.
    7. Reboot! Your banners are now prettier.
    [​IMG]
     
    Last edited by Blundermann, Dec 8, 2016
  2. Deleted User

    Deleted User Newbie

    Does this work on sysNAND?
     
  3. Blundermann

    OP Blundermann GBAtemp Regular Member

    Joined:
    Oct 15, 2013
    Messages:
    173
    Country:
    United States
    It should work just fine. Don't hold me to that, though, as I haven't tested it on SysNAND.
     
  4. DKB
    This message by DKB has been removed from public view by raulpica, Dec 9, 2016, Reason: Clean up -rp.
    Dec 8, 2016
  5. Nikolay
    This message by Nikolay has been removed from public view by raulpica, Dec 9, 2016, Reason: Clean up -rp.
    Dec 8, 2016
  6. QuarkTheAwesome
    This message by QuarkTheAwesome has been removed from public view by raulpica, Dec 9, 2016, Reason: Clean up -rp.
    Dec 8, 2016
  7. Deleted User

    Deleted User Newbie

    Yay, the new Banners aren't boring anymore.
     
  8. Blundermann
    This message by Blundermann has been removed from public view by raulpica, Dec 9, 2016, Reason: Clean up -rp.
    Dec 8, 2016
  9. Kohmei

    Kohmei GBAtemp Advanced Fan Member

    Joined:
    Feb 17, 2013
    Messages:
    819
    Country:
    United States
    Does not work on SysNAND, presumably because of the modified bootLogo
    You should be able to replace everything else though
     
    Blundermann likes this.
  10. pietempgba

    pietempgba GBAtemp Advanced Fan Member

    Joined:
    Jun 9, 2016
    Messages:
    970
    Country:
    United States
    use the modified boot logo in cfw it has patches for custom bootMovie and bootLogo
     
  11. kingraa777

    kingraa777 boom! Member

    Joined:
    Apr 17, 2015
    Messages:
    1,241
    Country:
    Cool nice work :)
     
  12. AmandaRose

    AmandaRose Do what I do. Hold tight and pretend it’s a plan Member

    Joined:
    Aug 19, 2015
    Messages:
    7,950
    Country:
    United Kingdom
    tried this on sysnand and everything showed up fine until I switched off the wiiu then the homebrew channel went back to the old icons.

    Edit forget that I just tried it again and it now seems to be working after I switch the wiiu off lol not sure why it did not work the first few times I tried.
     
    Last edited by AmandaRose, Dec 9, 2016
  13. Irastris

    Irastris GBAtemp Maniac Member

    Joined:
    May 3, 2015
    Messages:
    1,115
    Country:
    United States
    I love these designs. I was always bothered by the current HBL banner design because the glow effects were completely destroyed by the 24-bit TGA format.

    Thank you for these! Too bad I won't be able to enjoy the sysConfigTool design because sysConfigTool doesn't show its banner when installed on sysNAND. :P
     
  14. punderino
    This message by punderino has been removed from public view by raulpica, Dec 9, 2016, Reason: Chill, dude -rp.
    Dec 9, 2016
  15. zeldaism

    zeldaism GBAtemp Advanced Fan Member

    Joined:
    Apr 19, 2016
    Messages:
    842
    Country:
    United States
    Thank you for the banners. They look much better. :yay:
     
  16. Deleted User
    This message by Deleted User has been removed from public view by raulpica, Dec 9, 2016, Reason: Clean up -rp.
    Dec 9, 2016
  17. Conn0r
    This message by Conn0r has been removed from public view by raulpica, Dec 9, 2016, Reason: Clean up -rp.
    Dec 9, 2016
  18. DarkIrata

    DarkIrata GBAtemp Fan Member

    Joined:
    Jun 12, 2015
    Messages:
    485
    Country:
    Gambia, The
    To be honest.. it's bad manners to say the current banners aren't pretty...
    The better way is to ask politly if you could submit a better one..

    I got asked by Maschell (He loved my HIDToVPAD 1.1 Design<3 http://puu.sh/rqDTn/dfe8e3f4ce.png) to make a HBL banner and icon, because they didn't had one at the time, Dimok choose another instead, and now? Should i say my is better or start a thread about it saing i dont like it, here a better ones? No.
    [​IMG]

    i like the current ones and wouldn't say it's not pretty.
    I'm sure there are people who dont like the IOSUHax banner which i made, if it's not changed. Not sure, don't use it much~ :D and it would p*ss me off if someone say even Bee Movie is better than it, instead submit friendly, another one without advocate it.
     
    dojafoja and DaBlackDeath like this.
  19. DaBlackDeath

    DaBlackDeath .::[ lone wolf ]::. Member

    Joined:
    Dec 22, 2007
    Messages:
    920
    Country:
    Germany
    What an awesome design. I love it. :shy:
     
    DarkIrata likes this.
  20. Blundermann

    OP Blundermann GBAtemp Regular Member

    Joined:
    Oct 15, 2013
    Messages:
    173
    Country:
    United States
    I said, "isn't pretty enough for me". I wasn't saying that it doesn't look good objectively. I'm poking fun at myself in the OP, because it's something so trivial and silly.
    I'm not aiming to replace the banners in the official distribution of the HBL channel, I just want to give other users the option to use my graphics, if they happen to like them more.
    And, for the record, I love the IOSUHax banner. Actually, it's one of the reasons that I put this idea into action in the first place.

    I mentioned before in a post that got deleted for some reason, that I mean no disrespect by this at all. I'm not trying to genuinely insult any of the original graphic designers, or say that their product is bad. I'm just a graphic designer like you, and I made these because I think they look nice.
     
    Last edited by Blundermann, Dec 9, 2016
    AmandaRose likes this.
  21. Dragon91Nippon

    Dragon91Nippon Advanced Member Newcomer

    Joined:
    May 14, 2020
    Messages:
    54
    Country:
    Japan
    Anyone got a backup of the banners, it seems the op deleted their mega account.
     
  22. CrisMod

    CrisMod GBAtemp Regular Member

    Joined:
    May 4, 2020
    Messages:
    168
    Country:
    Italy
    Don't seems it's working the mega address man, but from them pic I can rework to remake them in HD and the TGAs ....you need both?
     
  23. GABO1423

    GABO1423 Vergación... Member

    Joined:
    May 27, 2019
    Messages:
    347
    Country:
    Venezuela
    Here you go, I was able to snag them before it was too late.
     

    Attached Files:

    CrisMod and E1ite007 like this.
  24. Ragolay

    Ragolay Newbie Newcomer

    Joined:
    Jun 16, 2020
    Messages:
    1
    Country:
    Spain
    Hi!

    I customize a few forwarders (SNES9X, VBAGX, FCEUGX, Wii64...) with Teconmoon but only works with .dol, and I want to customize a LoadiineGX2 forwarder with my custom icon and my custom banner.

    Can you tell me what kind of tool use to customize a .elf?

    Thank you and sorry if I have some mistakes, i'ts my first post! :)
     
Draft saved Draft deleted
Loading...

Hide similar threads Similar threads with keywords - [RELEASE], Prettier, Banners

Share this thread:

Facebook Twitter Reddit Tumblr Telegram WhatsApp
Site Map